AirGrid M2 is a complete outdoor unit including a 20 dBi antenna for 2.4 GHz band, suitable for remote clients. Unit allows real communication speeds up to 100 Mbps.
For high speed transmission unit uses standard 802.11 and in the case of use as a client unit also supports AirMAX (TDMA) to connect to AP with low latency. The unit can also operate against AP supports only standard 802.11g. Antenna system uses patented technology to achieve the best InnerFeed properties while maintaining a good price.
Web-based configuration is very simple and clear. Can be set as:
- AP mode, client or WDS - Traffic shaping - QoS - Between WAN and LAN routing and transparent bridge without NAT or NAT - Signal strength, which is suited to the specific signaling LED
In bridge mode and WDS device supports transparent transmission of IPv6.
Included is a USB PoE injector, through which you can directly drive power. Use a different way can be 24 V power supply with passive PoE injector.
Operation mode AP, Client, WDS
Frequence 2412 - 2462 MHz
Transmission speed 150 Mbps
Output for an external antenna no
TX Power regulation yes
Max.output power 20 dBm
Sensitivity -97 dBm
Modulation OFDM, BPSK, QPSK, QAM
Encryption WEP, WPA, WPA2
Comformity FCC, CE
LAN port 1x RJ45 10/100 Mbps
Default IP 192.168.1.20
Default name ubnt
Default password ubnt
Power supply 24 V - PoE, USB
Operational temperature -30 up to 75 °C
Dimension 540 x 380 x 160 mm
IPSec Transparent (bridge mode)
Supported OS AirOS V
Gain 20 dBi
Procesor MIPS 4KC, 400 MHz
RAM 32 MB
NAND 8 MB